Re install RB750/RB750G

In recent days I get my router failed upadate version. So the router was not able at the remote through Winbox or neighborviewer. The only way is to reinstall the router. Here I will explain how to reinstall rb750. Tools needed are:
  
   -   PC / laptop with Ethernet card
   -   Straight UTP Cable (1 piece)
   -   All Software Package MikroTik RouterBOARD version of your fit
   -   in this case using mipsbe.npk RB750
   -   Net Application Install
   -   Application Winbox

1. Connect the UTP cable from the PC to ether1 RB750
2. Enable application NetInstall

3. Select the 'Net Booting' and check 'Enable Boot Server' and fill in the ip address (use the ip address of an IP network with a PC / Laptop you) example 192.168.0.5 and the your PC / Laptop  192.168.0.2

 4. Then while we press the reset button we turn on the power RB750, press the reset button and hold until the drive appears in the column nstreme Routers / Drivers

 5. Select the drive that will be installed (in this case select the drives 'nstream' or 'proxy' package and then navigate to the folder where you save the file package router OS), then at the bottom of the column will display the packages will be installed (select the package what you plan to install by checking the package)
6. After that press the "Install". Wait until the installation is finished and reboot RouterBoard.
7. Once done, connect the RouterBoard you to the internet to upgrade its firware RB by going to the new terminal and type '/ system upgrade RouterBoard'
8. Then upgrade it with the latest OS, RB750 was able to be used again